Water-repellent coatings

Wall impregnation and protective coating (07.94)

 

A solution with the active ingredient of potassium methylsilanol to repel water and protect all porous silicate materials (plaster, concrete blocks, concrete, sandstone, bricks, clay roofing tiles, etc.) from the weather. Maintains vapor permeability, increases durability, creates a water-repellent, dirt free surface, and prevents the growth of fungi and moss. The product dries within 3 hours at a temperature of 20°C. Not diluted when used as a coating. Diluted with potable water at a ratio of 1:1 when used on less absorbent surfaces or as a spray. The dilution is 1:4 to 1:9 for maceration. Maceration time is 0.5 – 5 minutes Done in one layer. Lifetime of the coating is 5 – 10 years depending on the nature and intensity of weather conditions. Renewable with a subsequent coating.

Characteristics:

• Water-repellent, hydrophobic, diffusion
• High protection against climatic effects
• Long-lasting efficacy, prevents the formation of moss
• Enhances natural grain and appearance
• Prevents the destruction of porous materials

Wall impregnation and protective coating PROFI (07.95)

 

Polyxystearane compound for protecting porous material from adverse weather conditions, water seepage, corrosive chemicals, dirty air, and the effects of frost and deicing salts. Protects concrete, bricks, plaster, wood, natural and artificial stone. Enhances the natural grain and appearance of the treated material. Creates a dirt-free, hydrophobic surface. Prevents the growth of moss. Minimizes efflorescence. Can be done in one or two layers, but usually one layer is sufficient. Drying time is 3-4 hours and the surface is water repellent after 24 hours. The coating lasts for at least 5 to 10 years. The treatment can be subsequently renewed.

Characteristics:

• Enhances natural grain and appearance
• Diffusion, water-repellent, hydrophobic
• Can be painted over with water-diluted, synthetic and oil-based coatings
• Prevents the destruction of porous materials
• Prevents the seepage of impurities into the material
• Protects from the effects of frost and deicing salts.
• Directly increases the thermal and sound insulation properties of the wall