TOPAS domestic wastewater treatment plants
Basic information
TOPAS 5 to TOPAS 300 domestic wastewater treatment plants (for 5–300 persons) are used for treatment of all wastewater (including wastewater from washing machines and dish washers) from individual sources of contamination. These are mainly the following:
- family houses,
- recreational objects and cottages,
- hotels and pensions,
- restaurants.
wastewater treatment plants are delivered as complete products, including the lid without the necessity to purchase any additional adapters according to the depth of the inflow piping. For production of the skeleton frame of TOPAS wastewater treatment plants then polypropylene material is used which ensures the long term service life of the product.
In the Czech Republic wastewater treatment plants are certified by the SZÚ Brno testing laboratory. At the same time, attestations or certificates have been issued from the following countries: Germany (Deutsches Institut für Bautechnik), Romania, France, Poland and Russia. The original technical solution of TOPAS wastewater treatment plants is protected by international patent No 282 411.
Description of activity
Membrane air blower
TOPAS wastewater treatment plants work on the principle of the treatment of wastewater by means of activated sludge in upward substances. The air that is necessary for the life of the micro organisms is provided by a small membrane air blower with silent operation which is located directly in the plant. The air blower together with the added three-way electric valve is also used to power the air pump which ensures the pumping of water between the individual chambers of the wastewater treatment plant.
| Type of TOPAS wastewater treatment plant | Topas 5 | Topas 8 | |
|---|---|---|---|
| Installed air blower | - | Membrane air blower | |
|
60 l/min (18 kPa) |
80 l/min (18 kPa) |
||
|
Noise(measured in the distance of 1m) |
dB | < 38 | < 39 |
| Volume of supplied air | m3/hod. | 3,3 | 3,9 |
Sizes of TOPAS wastewater treatment plants
TOPAS wastewater treatment plants are delivered in the following sizes:
T5, T8, T10, T15, T20, T30, T40, T50, T75, T100, T125, T150, T200, T250, T300
The number for the size of the wastewater treatment plant states the number of population equivalent (PE), for which the respective wastewater treatment plant is constructed. At present 1PE corresponds to the consumption of 150l of water per day.
Description of the inside space of a TOPAS wastewater treatment plant
| Legend to the picture | |
|---|---|
| 1 | Air-lift for untreated water |
| 2 | Air-lift for the aerating filter for rough dirt |
| 3 | Air-lift for aeration of the sludge tank |
| 4 | Air-lift for pumping of the settlement tank |
| 5 | Air-lift for the suction of the semi-bottom of the sand filter |
| 6 | Aerating element of the activation tank |
| 7 | Aeration of the settlement tank |
| 8 | Air-lift for excessive sludge |
| 9 | Outlet of the air-lift for the collection of floating dirt from the level of the settlement tank |
| 10 | Air-lift for the aeration of the sand filter |
| 11 | Air-lift for the collection of dirt from the sand filter |
| 12 | Aerating element of the accumulation tank |
| 13 | Emergency float |
| 14 | Control float |
| 15 | Hair catcher |
| 16 | Air-lift for pumping of the sludge from the sludge tank |
| 17 | Grounding electrode |
| 18 | Three-way valve |
| 19 | Electric switchboard |
| 20 | Air blower |
| 21 | Float for the sand filter |
Technical data (for TOPAS 5 – 300)
Note: The daily flow of water can be exceed for a short time (about 2 days) by up to 200%.
Cross section of a TOPAS wastewater treatment plant
Layout
| A - | Accumulation (inflow) tank |
| B - | Activation tank |
| C - | Settlement tank |
| D - | Aerating sludge tank |
| E - | Air blower |
| F - | Sand filter |
Side view
Guaranteed parameters of TOPAS wastewater treatment plants
The following output values are guaranteed for TOPAS wastewater treatment plants:
wastewater treatment plant without sand filter:
| Parameter | Diameter “P” [mg/l] | Maximum „M” [mg/l] |
|---|---|---|
| BSK5 | 15 | 30 |
| NL | 15 | 30 |
| CHSK | 70 | 120 |
| N-NH4 | 15 | 30 |
wastewater treatment plant with sand filter:
| Parameter | Diameter “P” [mg/l] | Maximum „M” [mg/l] |
|---|---|---|
| BSK5 | 10 | 15 |
| NL | 10 | 15 |
| CHSK | 70 | 120 |
| N-NH4 | 15 | 30 |
The above mentioned values are achieved and guaranteed for wastewater treatment plants which are operated and loaded in accordance with the valid operating order and User Manual!
Variants of TOPAS waste water treatment plants
TOPAS Standard version
TOPAS 5 standard version
- Biological waste water treatment plant with efficiency of 95%
- Patented principle of operation based on alteration of the flowing and regenerating phase
- Built-in sound and lighting signalling of emergency status
- Heat-insulated, steam-proof, removable cap
- Independent sludge tank for anaerobic stability of sludge
- Completely removable technology while servicing the water treatment plant
- Treated water can be discharged into water streams (river, streams, lakes)
- Water can be used for watering of vegetation (with the exception of dropping)
TOPAS Version with sand filter
TOPAS 5 with sand filtering
- Unique technical solution of a waste water treatment plant
- Contains built-in sand filter for mechanical completion of the treatment of water at the outflow which during the regeneration phase is automatically washed several times during the day
- The efficiency of the treatment is higher than 98%
- The treated water can be used for penetration into the ground and underground water and for discharging into a rainwater sewerage system
- Recommended type for root and drop watering
Are you interested in this product? Contact us using form below or contact us directly on e-mail info@mrs.cz or call +420 545 175 844 or +420 602 707 001.