Technological Detectors for Belt Conveyors

Detectors of collapses in the overfill
RHP-5-S11200	NEW Flap-type overfill board detector is suitable for fixed conveyors or overfills. It is produced in three basic designs according to supply voltage.
RHP-5-S12200	NEW Rod overfill detector is suitable for fixed conveyors or overfills. It can be used even for open overfills, e.g. filling into a container.
RHP-5-S13200	NEW Conic overfill detector is suitable for fixed conveyors or overfills. It is used for open overfills, e.g. filling of very fine material into a container (dust fraction).
BOS-4T	Rod conductivity overfill detector is suitable for fixed and movable conveyors or overfills. The probe works only with BOS-21. The conveyed material: e.g. coal, coke etc.
BOS-4L	Rope conductivity overfill detector is suitable for fixed conveyors or overfills. The probe works only with BOS-21. The conveyed material, e.g. coal, coke, etc.
BOS-21	Two-channel assessment unit for the conductivity probes BOS-4T and BOS-4L
UMV-1	Complete ultrasonic overfill detector. It is suitable for all types of conveyors, various conveyed materials and various fractions.
Rotation Detectors
SHR-2	NEW Rotation detector in a robust design responding to the magnets MHR-2, MHR-3, MHR-4, MHR-5. It does not contain any electronics or movable mechanical parts. It is resistant to atmospheric effects. It does not require feeding.
VHR-Z	Amplifier modifying pulses from the SHR-2 detector for connection to the assessment unit VHR-10M or to the PLC automat.
SHR-3	NEW Rotation detector in a robust design responding to the magnets MHR-2, MHR-3, MHR-4 and MHR-5. It contains an amplifier of pulses for connection to the assessment unit VHR-10 or to the PLC automat. It requires feeding.
MHR-2, MHR-3, MHR-4, MHR-5	NEW Magnets for the rotation detectors SHR-2 and SHR-3.
VHR-10M	Two-channel assessment unit of the creep of belt conveyors and other rotating machines. It assesses pulses from detectors. It allows information data transfer, see automation.
K1-VHR-10M-D	Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of two detectors SHR-2. It is necessary to select the type VHR-10M for the box.
K1-VHR-10M-S	Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of one detector SHR-2. It is necessary to select the type VHR-10M for the box.
K1-VHR-10M-I	Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of two detectors SHR-3 or other detectors except for SHR-2.. It is necessary to select the type VHR-10M for the box.
Belt Alignment Switches
LHPE-10/2-L50V	Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches in a two-stage mode at the angles of 15° and 25°. The box – glass-fabric laminate. Contact 2 × module 1 × break-type contact and 1 × closing contact.
LHME-10/2-L50V	Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches in a two-stage mode at the angles of 15° and 25°. The box – grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
LHPE-10/1-L50	Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact.
LHME-10/1-L50	Electromechanical switch in a robust design with an adjustable lever. It switches at the angle of 25°. The box – grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
LHPE-10/2-LV	Electromechanical belt alignment switch in a robust design with a fixed lever. It switches in a two-stage mode at the angles of 15° and 25°. The grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
LHME-10/2-LV	Electromechanical belt alignment switch in a robust design with a fixed lever. It switches in a two-stage mode at the angles of 15° and 25°. The box - grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
LHPE-10/1-L	Electromechanical belt alignment switch in a robust design with fixed lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact.
LHME-10/1-L	Electromechanical belt alignment switch in a robust design with fixed lever. It switches at the angle of 25°. The box – grey cast iron. Contact 1 × module 1 × break-type contact and 1 × closing contact.
VSP-3B	Multidirectional electromechanical belt alignment switch in a robust design with a spring lever. It switches in all directions. The box – steel. Contact 1 – change-over contact.
ET-4T	Electromechanical belt alignment switch with an adjustable lever. It switches at the angle of 15°. The box – steel. Contact 1× change-over contact. Only for small conveyors in light industries.

End Switches
LHPE-10/1-R	Electromechanical end switch in a robust design with a fixed lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact.
LHPE-10/2-R2	Electromechanical end switch in a robust design with a fixed lever. It switches with the distinction between the right and left sides. The box – glass-fabric laminate. Contact 2 × module 1 × break-type contact and 1 × closing contact.

Material Detection
UMV1	KComplete ultrasonic detector for material detection on the conveyor belt. It is suitable for all types of conveyors, various conveyed materials and various fractions.
UMV1 s PID	Complete ultrasonic detector for material detection on the conveyor belt with the PID regulation. It is suitable for all types of conveyors, various conveyed materials and various fractions.

Are you interested in this product? Contact us using form below or contact us directly on e-mail info@mrs.cz or call +420 545 175 844 or +420 602 707 001.

Ask a question about this product

Columns marked by * are required.

Name:*: !

Phone:

E-mail:*: !

Message:*: !

Copy code:*: !