Plastic tanks

Use

Plastic tanks made of integrated polypropylene are suitable for general use, especially for storing liquids in agriculture and chemical and foodstuffs industry, for waste waters and in other areas where it is advantageous to make use of resistance of the reservoirs against various aggressive liquids.

The reservoirs are made of material tested for sanitary unobjectionable nature for contact with consumables and drinking water. The reservoirs must not be used for storing combustible matters.

Unit description

Whole-plastic reservoirs are made in two basic versions with circular or rectangular section plan, in various size series (with variable dimensions), as self-supporting or non-self-supporting according to static dimensioning.

Rectangular non-self-supporting (NO) – max. outside dimensions length x width 8000 mm x 2400 mm, height 3080 mm. Wall element thickness 80 mm. Dimensions of these reservoirs are graded in 200 mm.

Self-supporting rectangular reservoirs (NOS) make use of external ribbing and dividing walls. Maximum dimensions are the same as for non-self-supporting reservoirs. Requirements for the change of the reservoir dimensions must be consulted with the manufacturer.

Non-self-supporting and self-supporting circular reservoirs (NK) and (NKS) –
maximum dimensions are: diameter 3000 mm, height 8000 mm.

Advantages:

• Variability of dimensions and shapes
• Long service life
• Possible adjustment of type-specific reservoirs according to the customer’s requirements (supplementation of openings, dividing walls, thermal insulation)
• Possibility of manufacture of removable or non-removable, event. insulated covers
• Certification by an authorized person of the Building Technical and Testing Institute in Prague, and issued Declaration of Conformity.