Butterfly valves

Design 
Double-excentric butterfly valve, valve perfectly shut-off in either flow directions.Ductile iron body fusion 
bonded epoxy coated, ductile iron epoxy coated disc, stainless steel seat, EPDM sealing. Face to face 
according to EN 558-1 series 14. Flanged according to EN 1092-2. 
Applications 
For drinking water, sea water, air, other fluids on request.

Design 
Double-excentric butterfly valve, valve perfectly shut-off in either flow directions.Ductile iron body fusion bonded epoxy coated, internally coated with vulcanized EPDM rubber , ductile iron epoxy coated disc, stainless steel seat, EPDM sealing. Face to face according to EN 558-1 series 14. Flanged according to EN 1092-2. 
Applications 
For drinking water, sea water, air, other fluids on request.

Design 
Centered disc butterfly valve with elastomer liner (EPDM XC or Nitrile K). With lever, manual gearbox, electric or pneumatic actuator. Wafer-type body (T1), semi-lug type body (T2), full-lug type body (T4), U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and deadend service. Valve disc made of nodular cast iron or stainless steel. EN, ASME, JIS connections possible. 
Applications 
Engineering contractors, for water, crude oil and oils. Shut-off and control duties in water management, water supply, water treatment, drainage and irrigation.

Centered disc butterfly valve with elastomer liner (EPDM XC or Nitrile K). 
With electric actuator. Semi-lug type body (T2), full-lug type body (T4), U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. EN, ASME connections possible. Electric actuator by BERNARD CONTROLS: LE/SD type series for on/off control or positioning through proportional control (4-20 mA) 
Engineering contractors, for water, crude oil and oils. Shut-off and 
control duties in water management, water supply, water treatment, drainage and irrigation.

Centered disc butterfly valve with elastomer liner (EPDM XC or Nitrile K). 
With pneumatic actuator. Semi-lug type body (T2), full-lug type body (T4), U-section body with flat faces (T5). Body types T2, T4 and T5 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. EN, ASME connections possible. Pneumatic scotch-yoke actuator with VDI/VDE interface for open/closed position signalling via AMTROBOX C and Namur interface for control air supply. 
Engineering contractors, for water, crude oil and oils. Shut-off and 
control duties in water management, water supply, water treatment, drainage and irrigation.

Design 
Centered disc butterfly valve, epoxy-coated. Perfect shut-off in either flow direction. Flanged ends to EN standards. Vulcanised elastomer coating. Face-to-face length to EN 558/13. Body and valve disc made of nodular cast iron. 
Applications 
Shut-off or control duties, drinking water, sea water, water supply, treatment, distribution, waste water, irrigation, high-purity water, air, oil.

Design 
Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU or Nitrile K). With lever, manual gearbox or pneumatic actuator. Full-lug type body (T4), 
suitable for downstream dismantling and dead-end service. Valve disc made of stainless steel 1.4308. Connections to EN possible. 
Applications 
Heating, ventilation, air-conditioning, for drinking water.

Design 
Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU). With electric actuator. Semi-lug type body (type T2), suitable for downstream dismantling and dead-end service. Valve disc made of nickel-coated nodular cast iron. Connections to EN possible. Electric actuator by BERNARD CONTROLS: LE / SD type series for on/off control. 
Applications 
Heating, ventilation, air-conditioning. 

Design 
Butterfly valve for building services, with anti-condensation feature, elastomer liner (EPDM XU or Nitrile K). With electric actuator. Full-lug type body (T4), suitable for downstream dismantling and dead-end service. Valve disc made of stainless steel 1.4308. Connections to EN possible. Electric actuator by BERNARD CONTROLS: LE / SD type series for on/off control. 
Applications 
Heating, ventilation, air-conditioning, for drinking water.