Shower pools

Shower pools

ROUND SHOWER POOLS
made of 1.4404 grade V4A stainless steel

Pool edges are 6cm wide and square-edged, flush with the walkway, no slope to pool base.
As with all shallow pools, the footbath has anti-slip floor coating which complies with EN 13451.

Dimensions
Diameter 2.00m
Water depth 0.10m
Depth 0.15m

Installation
On site self-assembly is possible.

Anchoring brackets are attached by dowels inserted into the foundation plate as per the assembly plan and fixed with anchoring fins at the appropriate level/during the levelling process (height adjustable).

The company can of course also manufacture square and polygonal shower pools on request.

SINGLE -  or DOUBLE FREESTANDING SHOWERS
made of 1.4404/1.4571 grade V4A stainless steel.

Stainless steel tube diameter 104 x 2mm with highly polished finish comprising:
125° tube elbow connecting seamlessly to the vertical tube, with non-scaling shower head (100mm dia.). Mounting flange with 3 mounting holes. Mounting hole optionally at the rear, front or side, with shower radius closely matched to the cover plate.
Easy to install screw clamps, accessible via the mounting hole for connection of mains water pipes.
Isolating valve with ESD control (powered by 9V battery good for approx. 250,000 operations), precise timer setting independent of water pressure.

Technical data
Operating pressure max. Pe = 1.0-6.0 bar
Adjustable run time approx. 5 - 1275s
Throughflow Q=0,45l/s
(3 bar flow pressure and free outlet)
Connection from base

 

Fittings

Standard

  • Drain and overflow fittings
  • Drain plug R 2" 
  • Overflow via a welded elbow with cover plate and common pipework with DN 65 connectors
  • Single freestanding shower (EBR)
  • with isolating valve and hose connection 3/4" for water supply

Special features for freestanding shower
(subject to additional charge)

  • Global joint in shower head
  • Single-handed operating lever for cold/warm water
  • Foot spraying facilities for disinfection
  • Installation of trace heating for winter use
  • Tap installation
  • Double freestanding shower
  • with one pole and 2 shower heads

 


Are you interested in this product? Contact us using form below or contact us directly on e-mail info@mrs.cz or call +420 545 175 844 or +420 602 707 001.

Ask a question about this product

Columns marked by * are required.

Kód